Skip to main content

X CBSE | NCERT Solutions:Carbon and its compound Solved Important...

1.Q. Why carbon form covalent bond by sharing electron?

Ans: Carbon has four electrons in its outermost shell and needs to gain or lose four electrons to attain noble gas configuration.  (i) it could gain four electrons forming C4-anion. But it would be difficult for the nucleus with six protons to hold on to ten electrons, that is, four extra electrons. (ii) It could lose four electrons forming C4+cation. But it would require a large amount of energy to remove four electrons leaving behind a carbon cation with six protons in its nucleus holding on to just two electrons.
Hence, it is difficult for the carbon to lose or gain four electrons therefore  carbon formcovalent bond by sharing electron

2.Q. Why do covalent compounds are in gaseous or liquid state at normal temperature and pressure.

Ans: due to Weak Vanderwaal’s forces present between the molecules of covalent compounds.  

3.Q. Why do covalent compounds have less melting and boiling points?

Ans: As energy required breaking the crystal is less due to the presence of weak Vanderwaal’s force.

4.Q. Why do covalent compounds are bad conductors of electricity?

Ans: Due to the absence of free electrons or free ions.

5.Q. Why graphite has high melting point?

Ans: Within each layer of graphite, every carbon atom is joined to three others by strong covalent bonds. This forms a pattern of interlocking hexagonal rings. The carbon atoms are difficult to separate from one another. So graphite also has high melting point.

6.Q.why is  diamond known as the hardest metal?

Ans: each carbon is  linked to four other carbon atoms forming regular and tetrahedral arrangement and this network of carbon atoms extends in three dimensions and is very rigid. This strong bonding is the cause of its hardness and its high density.

7.Q.Define term  allotropy?

Ans: Allotropy is the property by virtue of which an element exist in more than one form and each form has different physical properties but identical chemical properties. These different forms are called allotropes. The two common allotropic forms of carbon are diamond and graphite.

8.Q. Name the products formed when methane burns in :
(a) Sufficient supply of air. (b) Insufficient supply of air. 
Write the chemical equations for above reactions. 

Ans:When methane burns in a sufficient supply of air then Carbon dioxide and water vapours are formed.
CH4 + 2O2 -------burning---->   CO2 + 2H2O.
When methane burns in an insufficient supply of air then carbon monoxide and water vapours are formed.
2CH4 + 3O2 ---------->  2CO + 4H2O

Q. 9 Give any one test to distinguish between methane and ethene gases in the lab. Name the reaction by which ethene molecule can be converted into polythene.

Ans. Ethene gas decolourises the bromine water but methane being  a saturated hydrocarbon doesn't decolourise the bromine water.
CH2 = CH2 + Br2 (aq)  -----> CH2Br-CH2Br (1,2-dibromo ethane).
 Polymerisation is the reaction by which ethene molecule get converted into polythene.

10.Q. What is meant by homologous series? State any four characteristics.

Ans. The member of the same class of organic compounds such as alkanes when arranged in ascending order of their molecular mass differ from  each other by (-CH2) group are called homologous and series is known as homologous series.
The characteristics of homologous series are :
a. The members of a homologous series are represented by the same general formula.
b. The members of homologous series differ by (-CH2) group.
c. The members of same homologous series show similar chemical properties.
d. The members of same homologous series show different physical properties.



Links For   CBSE Class X Science Term-II
For Solved CBSE Exam questions Visit  Read more

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca