Skip to main content

Floatation_Class-9 important solved Questions from previous year CBSE Board Paper

Fully Solved Questions from previous year board Paper
Question: 1. What causes buoyant force (or up thrust) on a boat?

Answer: Buoyant force is due to volume of boat and density of water.

Question: 2. what is the cause of buoyant force?

Answer: : The pressure difference on lower part and upper part of a body cause of buoyant force .

Question: 3. An Object of volume V is immersed in a liquid of density P. Calculate the magnitude of buoyant force acting on the object due to the liquid

Answer: Vd g

Question: 4. why does a block of wood held under water rise to the surface when released?

Answer: This happens because as upward force is greater than the weight.

Question: 5. What happens to the buoyant force as more and more volume of a solid object is immersed in a liquid. When does the buoyant force become maximum?

Answer: The buoyant force exerted by a fluid is equal to the weight of fluid displaced. Therefore the buoyant force increases as more and more volume of a solid object is immersed in a liquid.
Buoyant force is maximum when a body is completely immersed in a fluid.

Question: 6. Explain why, a piece of glass sinks in water but it floats in mercury.

Answer: The density of glass is more than water, but less then mercury, Therefore glass float on mercury and sinks in water.

Question: 7. When is the pressure on the ground more when a man is walking or when a man is standing ? Explain. 

Answer :  When a man is walking is weight is alternately on one feet or the other, when he is standing, his weight is divided on both feet. Therefore pressure is more on the ground when he is walking (as surface area is less).

Question: 8.  A solid weighs 80 g in air, 64 g in water. Calculate the relative density of solid. When kept in water, state if the object would float or sink?

Answer:  Weight loss in water = (80 -  64) g = 16
Relative density of solid = (weight in air/ Weight loss in water) = 80/16= 5
Since relative density of water is 1 which is less than that of solid. Hence Solid Sink

Question: 9. why density varies?

Answer: The density of a material depends on two things.
(i) The individual mass of each atom or molecule of substance  (ii) How tightly the atoms are packed

Question: 10. An object is suspended with a string . The string is stretched. When the object is completely immersed in water, the extension of the thread decreases. Why?

Answer : This happen because when the object is completely immersed in water it experience an upward force that cause weight loss.
More Questions are solved Here:  http://jsuniltutorial.weebly.com/
Sure shoot MCQ for class 9 science term-2 ClicK Here

IX Thrust and Pressure, Archimedes’ Principle, Relative Density
CBSE Class 9 - Science - Chapter 10: Flotation: Notes and Quest
MCQ: Flotation: Thrust, Pressure, Buoyancy and Density
Thrust and Pressure, Archimedes’ Principle, Relative Density key point
Notes : Flotation: Thrust, Pressure, Buoyancy and Density
Physics Flotation Term-II Class IX  Buoyant force Detail Study
9th Physics Solved Numerical Floating bodies

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca