Skip to main content

SOLVED CBSE TREND SETTER QUESTIONS CLASS - X (Acid Base and Salt)

Picture
Question:  How does baking powder differ from baking soda?
Answer:  Baking soda is a single compound which has sodium hydrogen carbonate which is  alkaline (basic) in nature
Baking powder is a mixture of sodium hydrogencarbonate and a mild edible(eatable) acid such as tartaric acid. When baking powder mixes with water, then the sodium hydrogencarbonate reacts with tartaric acid to evolve carbon dioxide gas which gets trapped in the wet dough and bubbles out slowly making the cake to rise and hence 'soft and spongy'.The equation which takes place can be shown as:
NaHCO+ H+  ----> Na+ +  CO+ H2O
Question:  What will happen if heating is not controlled while preparing Plaster of Paris from gypsum?
Answer:  It may be noted that the temperature should be controlled carefully. It should not be allowed to rise above 152°C (425K) because, if whole of the water is lost then anhydrous calcium sulphate is produced, which is called dead burnt plaster and it does not have the properties of Plaster of Paris.

Question:   Explain how pH change in the river water can endanger the lives of aquatic animals.
Answer:  Living organisms can survive only in a narrow range of pH change. When pH of rain water is less than 5.6, it is called acid rain. When acid rain flows into the rivers, it lowers the pH of the river water. The survival of aquatic life in such rivers becomes difficult.

 Question:  What are the two main ways in which common salt (sodium chloride) occurs in nature? How is common salt obtained from sea water? Explain
Answer:  Salt exists in two forms in nature i.e. in sea water and in the form of Halite a mineral rock of common salt. Common salt can be prepared by evaporation of sea water. Sea water is collected in division of land and it is allowed to evaporate under sunlight. Water is evaporated leaving behind mixtures of salt, form which common salt is separated by dissolving it in suitable reagent and then, recrystallizing salt from the solution.
Question: Why aqueous solution of sodium carbonate is basic in nature?

Answer: Sodium bicarbonate is an amphoteric compound. Aqueous solutions are mildly alkaline due to the formation of carbonic acid and hydroxide ion:
NaHCO− 3 + H2O → H2CO3 + OH−  
Question: Why is an aqueous solution of ammonium chloride acidic in nature?
Answer: A basic component is the one that produces hydroxide (OH-) ions when dissolved in water. In aqueous solution of ammonium chloride, ammonium ions (NH4+) first associate with H2O and form ammonia and hydroxide ions.
NH4Cl + H2O = NH4+ + HCl ( equation 1)
NH4+ + H2O = NH3 + OH- (equation 3)
Since ammonium ions produce hydroxide ions, NH4+ are considered to be the basic components.
Question: Dry ammonia has no action on litmus paper but a solution of ammonia in water turns red litmus paper blue. Why is it so?

Answer: In dry state Ammonia contains no hydroxyl ions. On dissolving in water, it forms NH4OH which dissociates to give NH4 + and OH-ions. Thus solution becomes basic and turns red litmus paper blue.
NH3 (g) + H2O (l) ---------------> NH4OH (aq)
NH4OH (aq) --------------> NH4+ (aq) + OH- (aq)

Question:  What happens when (a) Solid sodium hydrogen carbonate is heated, (b) Chlorine gas is passed through dry slaked lime, (c) Gypsum is heated to a temperature of 373 K?
Answer: (a) When Solid sodium hydrogen carbonate is heated  from sodium chloride Na2CO3.10H2O (washing soda).
2NaHCO3 --------Heat---------->  Na2CO3 +H2O+CO2
(b) when Chlorine gas is passed through dry slaked lime, Bleaching powder is produced. Bleaching powderis represented as CaOCl2, though the actual composition is quite complex.
Ca(OH)2 + Cl2 → CaOCl2 + H2O
(c) if Gypsum is heated to a temperature of 373 K it forms plaster of Paris, CaSO4 ½ H2O
CaSO4 2H2O --- -373 K ------>  CaSO4 ½ H2O + 3/2 H2O
Question: Give the Names of Raw Materials that are required for the manufacture of  washing soda by solvay process. Write the reactions involved in the   process.
 Answer:  Common salt : NaCl.Sodium chloride.  Ammonia : NH3 .Ammonia
Lime Stone : CaCO3.Lime stone (Calcium carbonate)
 H2O + NH3 + NaCl + CO2  -----------> NaHCO3 + NH4Cl
2NaHCO3 ---------- Heat------>  Na2CO3+ CO2+H2O
CaCO3 ----------- Heat > CO2+CaO
 CaO + H2O --------->  Ca (OH)2 
Ca(OH)2+ 2NH4Cl ------------> CaCl2 +2NH3+2H2O
 Question:  What is efflorescence? Name one compound which shows efflorescence? support your answer with reaction?
Answer:  The processes of loosing water of crystallization, when the substance is exposed to air for long time to form anhydrous or monohydric  substance is called as efflorescence.  
Na2CO3 10 H2O, Sodium carbonate deca hydrate is one example. 
 Na2CO3 , 10 H2O -------------->Na2CO3 H2O + 9H2O
Question:   why is calcium sulphate hemihydrate called ‘Plaster of Paris’ ?

Answer: Plaster of Paris gets its name from large gypsum deposits in Montmartre in Paris. We know that plaster of Paris, which is chemically calcium sulphate hemihydrate is obtained by heating gypsum. So the origin of the name 'Plaster of Paris' is the fact that the source material gypsum is found in large deposits at Montmartre in Paris
Download full paper  SOLVED CBSE TREND SETTER QUESTIONS CLASS - X (Acid Base and Salt)
Download File

Fore more study material   Click Here

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca