Skip to main content

Science CBSE Physics Flotation Term-II Class IX Atmospheric pressure: Buoyant force

Science CBSE Physics Flotation Term-II Class IX Force : 
Pressure :Thrust : Atmospheric pressure: Buoyant force

.                                Atmospheric pressure                                                         
The pressure at any place due to the atmosphere is called atmospheric pressure. Its value varies from place to place and also with the time. 
Atmospheric pressure at the earth’s surface near the sea level is around 1.01x105 Pa. This value is known as 1atmosphere of pressure (1atmosphere = 760mm of Hg).
Pressure in fluids – All liquids and gases are fluids.
  • A solid exerts pressure on a surface due to its weight
  • Similarly, fluids have weight, and they also exert pressure on the base and walls of the container in which they are enclosed.
  •  Pressure exerted in any confined mass of fluid is transmitted undiminished in all directions.
  • The pressure in a liquid is the same at all points at the same horizontal level. As we go deeper in the liquid, the pressure increases.
Buoyancy
  • When an object is placed in a liquid, the liquid exerts an upward force on it e.g. When a piece of cork is held below the surface of water and then released the cork immediately rises to the surface.
  •  It is a common experience that a mug filled with water appears to be heavier when it is lifted above the surface of water in a bucket.
  • In general, whenever an object is immersed in water, it appears to lose some weight and feels lighter. The weight of the object in water is called apparent weight. It is less than its true weight.
  • The objects appear to be less heavy when submerged in water because the water exerts an upward force on them.
  • The upward force acting on an object immersed in a liquid is called buoyant force. The buoyant force is also known as upthrust. It is due to the buoyant force exerted by the liquid that the weight of an object appears to be less in the liquid than its actual weight in air.
  • It is due to the buoyant force exerted by water that we are able to swim in water and ships float on water.
  • The tendency of a liquid to exert an upward force on an object placed in it is called buoyancy.
  • As more and more volume of the object is immersed in a liquid, the upward buoyant force acting on it increases. But once the object is completely immersed in a liquid, then lowering it further in the liquid does not increase the buoyant force. This means that maximum upward buoyant force acts on an object when it is completely immersed in the liquid.
Factors affecting buoyant force 

1. The buoyant force exerted by a liquid depends on the volume of the solid object immersed in the liquid.
  • As the volume of the solid object immersed inside the liquid increases, the upward buoyant force also increases. And when the object is completely immersed in the liquid, the buoyant force becomes maximum and remains constant.
  • The magnitude of buoyant force acting on a solid object does not depend on the nature of the solid object, e.g. if two balls made of different metals having different weights but equal volumes are fully immersed in a liquid, they will experience an equal loss in weight and thus equal upward buoyant force. This is because both the balls displace equal weight of the liquid due to their equal volumes.
1. The buoyant force exerted by a liquid depends on the density of the liquid in which the object is immersed.
  • The liquid having higher density exerts more upward buoyant force on an object than another liquid having lower density. Thus, as the density of liquid increases, the buoyant force exerted by it also increases,
  • e.g. sea water has higher density than fresh water, therefore, sea-water will exert more buoyant force on an object immersed in it than the fresh water. It is easier to swim in sea water because it exerts a greater buoyant force on the swimmer.
  •  Similarly, mercury is a liquid having very high density. So, mercury will exert a very great buoyant force on an object immersed in it. Even a very heavy material like an iron block floats in mercury because mercury exerts a very high buoyant force on iron block due to its very high density.
Why objects float or sink in a liquid – 
A wooden block floats in water whereas a steel rod sinks in it. Thus some objects float and some sink in water.
When an object is put in a liquid, then two forces act on it:
1. Weight (W) of the object acting downwards,
2. Buoyant force (B) acting upwards.
An object will float or sink in a liquid will depend on the relative magnitude of these two forces acting on the object in opposite directions. Three cases arise:
1. If B exerted by the liquid < W of the object, the object will sink in the liquid.
2. If B = W, the object will float in the liquid.
3. If B > W, the object will rise in the liquid and then float.
Thus an object will float in a liquid if the upward buoyant force it receives from the liquid is great enough to overcome the downward force of its weight.
                For an object to float,     Weight of object = Buoyant force
But, Buoyant force = Weight of liquid displaced by the object\Weight of object = Weight of liquid displaced by the object.
Thus an object will float in a liquid if the weight of object is equal to the weight of liquid displaced by it.
The above relation holds true if the object has a lower density than the liquid.
  • If the object has a higher density than the liquid, then the weight of liquid displaced will be less than the weight of object, and the object will sink.
  • · An object will also float in a liquid if its density is equal to that of the liquid.
  • When we put a piece of iron in water, it sinks immediately because iron is denser than water. But a ship made from iron and steel floats on water. This is because a ship is a hollow object having a lot of air in it. Air has low density due to which the average density of ship becomes less than the density of water and the ship floats in water.
  • This can be explained in another way. A heavy ship floats in water as it displaces a large weight of water which provides a great buoyant force to keep it afloat.
Archimedes’ principle 
“When an object is wholly or partially immersed in a liquid, it experiences a buoyant force (or upthrust) which is equal to the weight of liquid displaced by the object”.
Buoyant force acting = Weight of liquid displaced on an object by that object
Archimedes’ principle is applicable to objects in fluids, i.e. liquids as well as gases. 
Gases (like air) exert an upward force (or buoyant force) on the objects placed in them but in most cases it is so small that we usually ignore it. It is the buoyant force due to displaced air which makes a balloon rise in air.
Buoyant force = Weight of water displaced by body.
and Buoyant force = Loss in weight of body in water.\ Loss in weight of body in water = Weight of water displaced by body. 
Applications of Archimedes’ principle –
1. It is used in designing ships and submarines.
2. It is used in determining the relative density of a substance.
3. The lactometers used for determining the purity of milk are based on Archimedes’ principle.
4. The hydrometers used for determining the density of liquids are based on Archimedes’ principle.
Density – The density of a substance is defined as mass of the substance per unit volume.
  • Density = Mass of the substance/Volume of the substance
  • The SI unit of density is kilograms per cubic meter (Kg/m3).
  • The density of a substance, under specified conditions, is always the same. So, the density of a substance is one of its characteristic properties.
  • The density of a given substance can help us to determine its purity.
  • Different substances have different densities e.g. density of water is 1000 Kg/m3 which means that the mass of 1 cubic metre volume of water is 1000 kg.
Relative density – The relative density of a substance is the ratio of its density to that of water.
  • Relative density of a substance = Density of the substance/Density of water
  • Since the relative density is a ratio, it has no units. It is a pure number.
  • The relative density of a substance expresses the heaviness (or density) of the substance in comparison to water e.g. the relative density of iron is 7.8, which means iron is 7.8 times as heavy as an equal volume of water.
  • The relative density of water is 1. If the relative density of a substance is more than 1, then it will be heavier than water and hence it will sink in water. 
  • On the other hand, if the relative density of a substance is less than 1, then it will be lighter than water and hence float in water. e.g. Ice has a density of about 900 kg/m3 and water has a density 1000kg/m3. 
  • Thus an ice cube has a relative density of 0.9 so it floats in water. The relative density of iron is7.8, so an iron nail sinks in water.
Read full Post  Read me

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca