Skip to main content

Physics class 10 Source of Energy Solved MCQ New

Class 10 physics chapter source of Energy for Class 10 science



Q.1. Choose the incorrect statement Source of Energy
(a) It is expected to harness wind power to minimum in open space.
(b) The potential energy content of wind blowing at high altitudes is the source of wind power.
(c) Wind hitting at the blades of a windmill causes them to rotate. The rotation thus achieved can be utilized further
(d) One possible method of utilizing the energy of rotational motion of the blades of a windmill is to run the turbine of an electric generator.

Ans (b)

Q.2. Acid rain happens because:
(a) sun leads to heating of upper layer of atmosphere.
(b) burning of fossil fuels release oxides of carbon, nitrogen and sulphur in the atmosphere.
(c) electrical charges are produced due to friction amongst clouds.
(d) earth atmosphere contains acids.
Ans . (b)
Q.3. In a hydro power plant
(a)potential energy possessed by stored water is converted into electricity.
(b) kinetic energy possessed by stored water is converted into potential energy.
(c) electricity is extracted from water.
(d) water is converted into steam to produce electricity.

Ans. (a)

Q.4. which one of the following forms of energy leads to least environmental pollution in the process of its harnessing and utilization?
(a)nuclear energy 
 (b) thermal energy
(c) solar energy 
(d) geothermal energy

Ans. (c)

Q.5. Which of the following is a non-renewable source of energy?
(a)wood            (b)sun 
(c)fossil fuels  (d) wind

Ans .(c)

Q.6. Ocean thermal energy is due to
(a) energy stored by waves in the ocean
(b) temperature difference at different levels in the ocean
(c) Pressure difference at different levels in the ocean.
(d) Tides arising out in the ocean.

Ans(b)

Q.7. the major problem in harnessing nuclear energy is how to:
(a) Split nuclei.
(b) Sustain the reaction.
(c) Dispose off spent fuel safely.
(d) Convert nuclear energy into electrical energy.

Ans.(c)

Q.8. which is the ultimate source of energy?
(a) water        (b) sun 
(c ) uranium  (d) fossil fuels

Ans. (b)

Q.9. The main constituent of biogas is
(a) Methane 
(b) carbon dioxide 
(c) hydrogen 
(d)hydrogen sulphide.

Ans.(a)

Q.10. the power generated in a windmill:
(a) Is more in rainy season since damp air would mean more air mass hitting the blades.
(b) Depends on the height of the tower.
(c) Depends on wind velocity.
(d) Can be increased by planting tall trees close to the tower.

Ans. (c)

Q.11. choose the correct statement:
(a)Sun can be taken as an inexhaustible source of energy.
(b) There is infinite storage of fossil fuel inside the earth.
(c) Hydro and wind energy plants are non polluting sources of energy. (d) Waste from a nuclear power plant can be easily disposed off.

Ans.(a)

Q12. which part of the solar cooker is responsible for green house effect?
(a) coating with black colour inside the box (
b) mirror
(c) glass sheet. 
(d) outer cover of the solar cooker

Ans.(c)

Q.13. In a hydroelectric power plant more electrical power can be generated if water falls from a greater height because:
(a) its temperature increases.
(b) larger amount of potential energy is converted into kinetic energy.
(c) the electricity content water increases with height.
(d) more water molecules dissociate into ions.

Ans. (b).

Q.14. choose the incorrect statement:
(a) We are encouraged to plant more trees so as to ensure clean environment and also provide bio-mass fuel.
(b) Gober-gas is produced when crops, vegetable wastes etc., decompose in the absence of oxygen.
(c) The main ingredient of bio-gas is ethane and it gives a lot of smoke and also produces a lot of residual ash.

(d) Bio-mass is a renewable source of energy.

Ans.(c)

Q.15. Fuel used in thermal power plants is

(a) water (b) uranium (c) biomass (d) fossil fuels

Ans. (d)

Class 10 physics, Class 10 science Boar exam related Questions

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca