Skip to main content

Class X Physics + Chemistry SA-1 Sample paper

Class X Physics + Chemistry   SA-1                Time- 2 hrs                            MM : 50       

General Instructions:-
1. Question 1 to 10very short answer questions of 1 mark each

 2. Question no 11 to 16 are short answer questions of 2 marks each 

 3. Question no 17 to 22 are also short answer question carrying 3marks each 

4. Question no 23 and 24 are long answer question carrying 5 marks. 

1. What is common to all acids?

2. A white chemical compound becomes hard on mixing proper quantity of water. It is also used in surgery to maintain joins in a fixed position. Name the chemical compound.

3. Name a device that help to maintain a potential difference across a conduct

4. A farmer has found that the pH of soil in his fields is 4.2. Name any two chemical material which he can mix the soil to adjust its pH.

5. Write the pH value, after which teeth start decaying?


6. When iron is heated with sulphur, iron sulphide is formed. Name the reaction.

7. Aluminium metal displaces iron from ferric oxide (Fe2O3)giving aluminium oxide and iron. Which is more reactive aluminium or iron?

8. What is the general name of the chemicals which are added to fat and oil containing foods to prevent the development of rancidity.

9. Why is very less quantity of heat energy produced in the connecting wires?

10. Which one has more resistance 100 watt bulb or 60 watt bulb?

11. A solution of a substance ‘X’ is used for white washing:

(i) Name the substances ‘X’ and write its formula. (ii) Write the reaction of he substance ‘X’ named in (i) above with water.

12. Write the balanced chemical equation to represent the following statements:

(i) Carbon (coke) burns in air to form carbon dioxide.

(ii) A piece of sodium metal on putting in water forms caustic soda and hydrogen gas

13. How is the concentration of hydroxide ions (OH-) affected when excess base is dissolved in a solution of sodium hydroxide?

14. A white substance having a strong smell of chlorine is used to clean water in water storage tank. Identify the substance. Write its chemical name and the reaction for its preparation.

15. How is plaster of Paris obtained? What reaction is involved in the setting of a paste of plaster of Paris.

16. Why does a compass needle get deflected when brought near a magnet?

17. Give three points of differences between an electromagnet and a permanent magnet.

18. Write down three precautions that should be taken to avoid the over loading of domestic electric circuits.

19. An electric lamp of 100 W, a toaster of resistance 50 W, and a water filter of resistance 500W are connected in parallel to a 220 V source. What is the resistance of an electric iron connected to the same source that takes as much current as all three appliances, and what is the current through it?

20. What are the advantages of connecting electrical devices in parallel with the battery instead of connecting them in series?

21 . How can three resistors of resistances 2 W, 3 W, and 6 W be connected to give a total resistance of (i) 4W (ii)1 W?

22. (i) Write the chemical names and formula of bleaching powder.

(ii) Why does bleaching powder smell of chlorine when exposed to air?

(iii) Write chemical equation to represent the action of dilute hydrochloric acid on bleaching powder.

23. (i) What is corrosion of metals? Name one metal which does not corrode and one which corrodes on being kept in atmosphere. (ii) How will you show that the rusting of iron needs oxygen and moisture at the same time?

OR, Write an activity to show that ionic compounds are good conductors of electric current in their aqueous solution.

24. What do you understand by the electrical resistance of a wire? State and define S.I. unit of resistance. The resistance of an electric lamp filament is 230 ohms. The lamp is switched on when the line voltage is 115 volts. What is the current in the lamp circuit? or

(a) What is the difference between direct current and alternating current? (b) Give three points of differences between an electromagnet and a permanent magnet.

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca